The solution is available for the ultra, ultra lite, 9000 hd and the max hd. If you’ve got one of those receivers its time to take them out of the closet and get your hands on the weather forecaster. The Viewsat weather forecaster is a serial to Ethernet adapter that comes with its own 5 Volt power adapter and RS-232 cable.

Installation of the device is relatively simple assuming your receiver is already hooked up to TV and satellite dish and ready to go.

1. Flash receiver via USB with your specific receiver software.
2. Remove WF from box, attach serial cable to serial side of main body, then connect the other side to serial on receiver.
3. Connect your WF to internet via Ethernet RJ45 cable.
4. Attach Power cable to main body and then plug into outlet.
5. Click menu on receiver remote.
6. For static IP:

Go to installation => Serial Setup => Network Setup => Network setting => put your IP

For non-static IP

Go to installation => Serial Setup => Network Setup => Network S/W upgrade => Start Upgrade. Software for WF is upgraded automatically.

Once upgrade is done, exit from menu system, it is now functional!

Big in Power, Small in Size! – Introducing the all-new Conaxsat Nano 2, a replacement to the older CNX-Nano. This new includes an external CNX Internet Adapter to allow a variety of media functions as well as automatic factory firmware upgrades. Coming from one of the most trusted brands in the community that has built its reputation by only manufacturing quality receivers at affordable pricing, the new Nano is truly one of the top performing USB PVR ready receivers in the market today.

The Nano 2 features a 9 days advanced electronic program guide, USB 2.0 host, Component Video output, Dolby Digital 5.1 Surround Sound with SPDIF, and of course is USB PVR ready. Simply attach any external USB hard drive (up to 1Tb) and start recording your favorite programs within seconds.

Features:

• Home Streaming Support. Play movies directly from computer.
• USB PVR Ready
• USB 2.0 Host
• Upgrade Software & Update Channel Database through USB 2.0 Port and RS232
• MP3/JPEG File Store and Play via USB 2.0
• Vacuum Fluorescent Display (VFD) Type of Front Panel Display
• MPEG-II Digital & Fully DVB Compliant.
• C/KU band control for each antenna
• LNB Tone Switch 22KHz mode on/off’- Multi-LNB controlled by DiSEqC 1.0, 1.2 and USALS’- Total 5,000 Channels Programmable
• Blind Scan
• Closed Caption Support
• Parental Lock
• PAL/NTSC automatic conversion
• Picture In Graphic (PIG)’- Teletext and subtitle directly from the On-screen Display (OSD)
• Electronic Program Guide (EPG) for On Screen Channel Information
• Zoom Function by 2x…..4x
• Game function with Stereo Sound
• Dolby Digital Bitstream Out through S/PDIF
• CVBS Video & Audio Output via RCA
• Component Y/Pb/Pr Output via RCA
• S-Video Output
• Universal Remote Control
• Multi-language supported for Menu and OSD
• Built-in Smart Card Reader

Features:

* Upgrade Software & Update Channel Database through USB Port and RS232
* MPEG-II Digital & Fully DVB Compliant.
* C/KU band control for each antenna
* LNB Tone Switch 22KHz mode on/off’
* Multi-LNB controlled by DiSeqC =>DiSEqC 1.0, 1.2 and USALS
* Total 5,000 Channels Programmable
* Blind Scan
* Smart Card Reader(Optional)
* Picture In Graphic (PIG)
* Electronic Program Guide (EPG) for On Screen Channel Information
* Multi-language supported for Menu and OSD
* Zoom Function by 2x..4x
* Parental Lock
* Closed Caption Support
* Dolby Digital Bitstream Out through S/PDIF
* CVBS Video & Audio Output via RCA
* Component Y/Pb/Pr Output via RCA
* S-Video Output
* MP3/JPEG File Play via USB Port
* 7-Segment(4-digit) Type of Front Panel Display

Conditional Access Interface

* SMART CARD(Optional) 1 Slot:
ISO 7816, GSM11.11 and EMV (payment systems) compatibility

Tuner & Channel

* Type 1 × F Type, IEC169-24, Female
* Frequency Range 950MHz to 2150MHz
* RF Impedance 75 Ohm unbanlanced
* Signal Level -65 to -25 dBm
* LNB Power 13.5/18.5Vdc +/- 5%, 0.5Amax, Overload Protected
* 22KHz Tone Frequency : 22KHz +/- 2KHz, 0.6Vpp +/- 0.2V
* DiSEqC Control Version1.0, 1.2, Tone burst A/B
* Demodulation QPSK
* Input Symbol Rate 2~45 Ms/s, SCPC/MCPC
* FEC Decoder Convolution Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8 With Constraint Length K = 7

System & Memory

* Main Processor 32-bit ARM946 RISC Processor
* Flash Memory 2 Mbytes
* System Memory 32 Mbytes
* Channel Capacity Digital Channel: 5,000
* Front 7-segment Display (4 digit)

Average User Rating 4/5

The CNX Duo is a lite version of the CNX Trio. Minus the Media capabilities. This unit’s main feature is its PVR.

MAIN FEATURES:

- Personal Video Recorder (PVR) Ready via USB 2.0
- Reserve Recording in EPG Mode
- Recorded file play on PC
- Upgrade Software & Update Channel Database through USB 2.0 Port and RS232
- Two USB 2.0 Host for USB Storage Devices (e.g. External HDD, USB Memory, etc)
- MP3/JPEG File Store and Play via USB 2.0
- Vacuum Fluorescent Display (VFD) Type of Front Panel Display
- MPEG-II Digital & Fully DVB Compliant.
- C/KU band control for each antenna
- LNB Tone Switch 22KHz mode on/off’- Multi-LNB controlled by DiSEqC 1.0, 1.2 and USALS’- Total 5,000 Channels Programmable
- Blind Scan
- Closed Caption Support
- Parental Lock
- PAL/NTSC automatic conversion
- Picture In Graphic (PIG)’- Teletext and subtitle directly from the On-screen Display (OSD)
- Electronic Program Guide (EPG) for On Screen Channel Information
- Zoom Function by 2x…..4x
- Game function with Stereo Sound
- Dolby Digital Bitstream Out through S/PDIF
- CVBS Video & Audio Output via RCA
- Component Y/Pb/Pr Output via RCA
- S-Video Output
- Universal Remote Control
- Multi-language supported for Menu and OSD
- Built-in Smart Card Reader

Average User Rating 3/5